The Bauer BM monorail geared motor is ideal for more efficient electric overhead conveyors while the Bauer BM09 monorail geared motor for low load applications fulfills the requirements of directive C1 of VDE 3643.
The ideal solution for floor conveyors
The clutch lever is always on the “L” side of the gear motor, the side opposite the motor. This enables the gear motor to be designed with an output shaft on both sides, which also allows it to be used as a drive for floor conveyors.
Reliable operation even in hostile environments
The drives are supplied with IP65 degree of protection as standard. This is a great advantage for operation in dusty environments.
Low-noise operation
The noise emission from two-ratio gear motors is lower than three-ratio motors with the same ratios. The first gear wheel, which is primarily responsible for noise, has a smaller diameter than three-ratio models.
Low operating costs
Gear motor size BM09 in the load range to approx. 2000 kg has worm gears for the first ratio and spur wheels for the second ratio. The specially developed worm gears with very low ratios provide very high efficiency, similar to that of bevel gear drives.
Fast maintenance of the attached brake
The gear motors are fitted with a brake for braking and positioning the electric overhead conveyor. Motors from size 80 (0.37kW) are supplied with an attached brake. The brake is mounted externally on the cast ventilation hood and keeps service times as low as possible.
Hollow shafts available through the whole product range in even the smallest sizes for easy cost effective application.
Bauer BM Series Geared Motors
European Electrical Equipment is a premier supplier of Bauer equipment. Below is a partial list of Bauer BM Monorail Geared Motors – BM Series we supply:
- Bauer BM09
- Bauer BM09X
More Information on Bauer BM Series Geared Motors
For specific information and pricing on Bauer BM Geared Motors – BM Series and Bauer replacement parts, please use our contact form or contact us via phone (908-418-2311).
·